It’s one of the questions we get asked most. Sectional or roller? Both are great options, and honestly, the right answer depends on your situation, but there are a few things worth knowing before you decide. There are also a couple of myths floating around that we’d like to clear up while we’re at it.

What’s the difference?

A sectional garage door is made up of horizontal panels that hinge together and travel up and overhead on a track system, sitting parallel to the ceiling when open. They look smart, they insulate well, and because they don’t swing out when opening you don’t lose any driveway space in front of the garage.

A roller door works exactly as it sounds; the door rolls up into a compact drum above the opening. They’re particularly popular where headroom inside the garage is limited, and they tend to take up even less space than a sectional when open.

One of the biggest differences is insulation. Roller doors can be up to 14mm thick, but none of them are actually thermally tested so aren’t a true insulated door. Sectional doors are a different story: they’re all thermally tested, and these values are typically stated in the product brochures so you know exactly what you’re getting. Most sectional panels are around 40mm thick which already makes a noticeable difference. If insulation is your main priority though, Hörmann’s LPU 67 door has a 67mm thick panel and is one of the best performing doors on the market for thermal efficiency.

Both operate smoothly with an automatic opener, and both can be fitted manually if needed (although we’d almost always recommend the automated motor).

Let’s bust a few myths

“Roller doors are always the better choice for smaller driveways.”
Roller doors are brilliant for tight spaces, that’s true. But sectional doors don’t swing out either, so they’re actually just as driveway-friendly as a roller. If space in front of the garage is your main concern, don’t rule out sectional; it might still be the better fit depending on your headroom and what you want the door to look like.

“Sectional doors are complicated to maintain.”
They’re really not. A decent sectional door from a reputable manufacturer is built to run reliably for years with very little attention. The mechanism is well engineered and the panels are robust. As long as it’s been installed properly in the first place (which is where using an experienced installer matters), there’s not much to worry about.

“Cheaper doors are just as good.”
This is probably the one we hear most and it’s the one that frustrates us most too. A cheaper door might look fine on day one. The difference shows up a few years down the line when the mechanism starts playing up, the springs wear out quicker than they should, or you find the manufacturer has disappeared and there’s no warranty to speak of. Higher-end doors use better quality components throughout (such as the motors, springs, and tracks), and that means they last longer and cause far fewer headaches. It’s one of those things where buying once and buying right genuinely saves money in the long run.

The brands we install

We’re fairly particular about our door manufacturers. We wouldn’t fit anything we wouldn’t be happy to have on our own garage, and that’s not just something we say.

For sectional doors, we install Hörmann, Teckentrup and Garador. Hörmann are one of the biggest garage door manufacturers in Europe and their build quality reflects that. Their doors come with a 10 year warranty on safe and reliable function, and a 5 year warranty on mechanical parts, both of which we pass on in full to our customers. Garador are actually part of the Hörmann group but manufacture in Britain, which a lot of our customers like knowing. Teckentrup are another solid choice, also manufacturing from a UK-based facility.

For roller doors we have a few more options: Hörmann again, plus Garador, AlluGuard, SWS, and Aluroll. SWS in particular is a brand we fit a lot of and rate highly. All of them are manufacturers we’re confident in, and the warranties they offer come straight through to you.

So which should you go for?

If you’ve got good headroom inside the garage and want a door with strong insulation and a more traditional panel look, sectional is probably your answer. If headroom is tight or you want the most compact solution possible, a roller is likely the better fit.

Either way, the conversation usually only takes a few minutes once we’ve had a look at the space. Contact us and we’re happy to come out and give you an honest recommendation with no obligation, no hard sell.