Home/Hörmann/RollMatic/RollMatic

RollMatic

The Hörmann Rollmatic is constructed of the highest quality materials; double skinned Aluminium with a foam infill to give the door it’s insulating properties.

The Hörmann Rollmatic is always purpose made to measure, so it can suit any size opening perfectly. The roller shutter garage door was originally designed to be rear mounted on the back of your reveal and the Hörmann version is no different, giving a seamless appearance from the front with only the curtain visible.

The Hörmann Rollmatic is available as a manual or automated roller shutter. The automated version is electronically operated through either a wall mounted push button or a remote control handset.
The automated version comes with 2 handsets as standard, it also comes with an internal courtesy light which comes on each time the door is operated, or can be operated independently.

Like all roller doors, Hörmann’s Rollmatic allows the home owner to park right up to the garage door, increasing the amount of available space on their drive way. The ceiling area of the garage remains clear, meaning that there’s plenty more available space to use within your garage.

The Hörmann Rollmatic has a couple of unique features. It was designed from the start to use Hörmann’s low voltage 24V DC motor, which is the same that is used in the Up & Over or Sectional Garage Door range. Because the Hörmann uses an external motor, the emergency manual override is easier to use than other roller doors and is operated by simply pulling a cord.

Options

Finishes
Colours
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.
Extras

Standard specification of the Hormann Rollmatic includes:

  • 2 hand held transmitters (Hormann HSE4 BS)
  • Impulse remote control with integrated lighting in the control housing box.
  • Automatic safety cut out with obstacle detection
  • Soft start and soft stop garage door operation.
  • Emergency internal release in case of power failure
  • Fully enclosed hood and fascia colour matched to the curtain colour.
  • Colour matched guides for ALL roller garage doors including Decograin finishes.
  • Mechanical security kit for prevention of vertical forced entry.
  • Storm anchors on curtain to provide large wind loads on curtain and increase security from lateral forced entry.
  • Motor position is on Left Hand Side when inside garage looking out.

Optional extras on the Hormann Rollmatic

  1. Chamfered bottom profile
    The solution for sloping ground: A chamfered aluminium bottom weather seal compensates for differences in height over the entire door width (max. 300 mm).
    The profile can be fitted without any difficulty. It is simply screwed onto the inserted curtain.
    The bottom profile is delivered powder-coated in Jet black (similar to RAL 9005) as standard.
    On request, the bottom profile is also available in a colour matching the door colour.
  2. Additional fascia panel
    This stabilises the fascia panel during fitting in the opening or behind the opening, if the panel can be seen in the opening. It harmoniously covers the lintel without any unattractive fitting holes. The panel is available in the colour of the door or with a Decograin surface.
  3. Fitting compensation set
    With uneven walls, the optional fitting compensation set for flush door fitting can be applied. This is particularly advantageous for modernisations or timber structures.

Resources

View videos, brochures and more.